How to Reset a Kwikset Lock Code

Whether you have lost your key, or you suspect someone has a passcode to your home, you may want to know how to reset a Kwikset lock code. These locks are more secure than standard deadbolts, but they can also have issues. Luckily, there are ways to fix these problems. Using the correct procedure to reset a Kwikset smart lock can get you back into your home. Here are the steps you need to follow to do so.

First, you will need to remove the cover window on the panel that holds the lock in place. This can be done by lifting the whole cover or by unscrewing the side screws. Then, you will need to remove the battery pack that is located on the top of the panel.

Next, you will need to find the Programming button, which is usually the larger button in the center. This is where you will set up all of the functions of your lock. During programming, you will need to enter the Programming Code, which is an added security feature. The Programming Code should be between four and ten digits. If the code you have is not enough, you can add another code, but make sure that it is in the proper range. The Programming Code cannot be the same as any user codes.

After you have found the Programming button, you will need to enter the current Programming Code into the keypad. You should hear a beeping sound while you are doing this. You will also need to enter a User Code, which is a one-time code that you can use once to activate the lock. These codes will be removed once you are done with the programming process. If you have a SmartCode 917, you will need to enter a Master Code before you can enter a new user code.

You will need to rekey both cylinder sets of the lock. You can use either a Phillips-head screwdriver or flathead screwdriver to do this. You will need to replace the battery pack on the lock, as well. You should also remove the lock cylinder from the lock housing. You should be able to do this by pulling it up.

If you have a Kwikset SmartCode door lock, you should not be able to locate the button by looking at the lock. You will need to press it after you enter the User Code. Once you do this, the LED will flash green. If this is not the case, you will need to do some additional programming to reset a Kwikset.

Once you have completed the steps, you will be able to unlock and unlock your door. You can also update the firmware of your smart lock. The lock will then be able to be paired with your home security system. In addition, you will be able to add User Codes to the lock. If you are having trouble resetting your Kwikset, you may need to use the Premis app to unmute the sound. This is a free app that can help you with the process. It will also allow you to delete all of your codes at once.